Advanced IP Scanner is a fast and reliable solution for network scanning. It will allow you to quickly and easily retrieve all the required information about the computers connected to the network. With a single click of the mouse, it is possible to turn a remote PC on or off, connect to it via Radmin, and much more.
Using multithreaded scanning technology, Advanced IP Scanner can process networks consisting of several hundred computers in just a few seconds.
Everything you need to know about Advanced IP Scanner 2.1 in just 3 minutes (video)
Creating a Favorites List of Computers for Regular Use
1. Scan the network.
2. Select the required computers and click the "Add to "Favorites" option in the shortcut menu.
3. You can now work on these computers by using the "Favorites" tab.
4. You can also add a new computer in "Favorites" by clicking the "Add" button on the "Favorites" tab and entering data for the required computer in the dialogue box that appears on the screen.
You can also save the list of computers from the "Favorites" tab. The file will be saved in .xml format.
To perform this operation:
Shortcut menu - "Save";
Main window - "Favorites -> Save";
Main menu - "File -> Save".
To load the list of computers from a file to the "Favorites" tab, follow these steps: Main window - "Favorites -> Load".
Radmin is one of the best remote control software for Windows, allowing you to work at a remote computer as if you were sitting right in front of it, using a standard graphical interface.
1. Select the required computer from the results of the network scan or from the "Favorites" tab.
2. If Radmin Server is detected on that computer, right-click on the Radmin option and select the required type of Radmin connection from the shortcut menu. To connect to a remote computer, you will need Radmin Viewer to be installed on your computer. Radmin Viewer is available for free and can be downloaded here: www.radmin.com/download/.
This allows you to set the starting IP-address as xxx.xxx.xxx.0 and the end IP-address as xxx.xxx.xxx.255, where "xxx" are the current values of the entered IP-address.
The "High-accuracy scanning (lower speed)" option allows you to scan each computer several times. This improves the accuracy of the scan, but takes more time.
The scanning rate slider allows you to smoothly change the speed of the scan, as well as the processor and network load.
Click on the "OK" button to save changes to the settings.
To perform this operation:
Main menu - "Settings -> Options … -> Performance".
The "Resources" section of the application settings allows you to select the resources to be scanned. The lower the number of resources selected, the less time the scanning process will take.
Click on the "OK" button to save changes to the settings.
This function allows you to try shutting down the selected computer remotely (if you are authorized to do so).
To perform this operation:
Main menu - "Operations -> Shutdown";
Toolbar - "Shut down" button;
Shortcut menu - "Shut down".
After pressing the "Shut down" button, the dialog box shown below will appear on the screen, where the following operations can be carried out by selecting the corresponding options:
"Forced shutdown" – shut down/reload the computer, even if some programs are still running and warning messages about the possible loss of unsaved data in case of restart appear;
"Reboot" – reboot the computer instead of turning off;
"Message" – warns the user that "Your computer will restart in N seconds".
This function sends the "Wake-On-LAN" command to selected computers. This command will only be sent to computers where the MAC-addresses have been identified.
Advanced IP Scanner 2.1 - Online Help)
)
)
)
)
)
)
)
)
)
)
)
)
Copyright © 1999-2012 Famatech. All rights reserved.
