[GUIDE] How to establish the connection outside of LAN


Search  Rules 
Forgot your password?
Pages: 1
[GUIDE] How to establish the connection outside of LAN
Here are the steps you must take in order to establish Radmin connection:

1. Download Radmin Server 3.x here and install it on the remote computer. A remote computer is a computer which you want to gain access to later via Radmin.

2. Download Radmin Viewer 3.x here and install it on the local computer. A local computer is a computer from which you connect to the remote computer.

3. On the remote computer right click on the blue Radmin icon in the system tray and click "Settings for Radmin server".

Click "Permissions", make sure Radmin security is selected and then click the corresponding "Permissions" button.

Click "Add user", choose username and password and click OK, OK. Then exit Radmin Server settings.Then please check all the boxes for the desired connection types you want the selected user to have.

You are done with the settings of Radmin Server.

4. The port you need to use is 4899. This is a default port, you can change it if you want, in Radmin Server Settings -> Options.

5. If the remote PC is located in a different LAN or is behind a router please download Hamachi from here: Install Hamachi on your local and remote PC. Run Hamachi, click “Power On” button on the lower left part of Hamachi window.

You will get a virtual IP address shown on the upper part of Hamachi window. This IP address will be used for connecting with Radmin. Then please click Create or Join Networks button on the lower right part of Hamachi Window – choose Create a new Network.

Set a desired name and a password for your virtual network. Then on the remote PC please click Create or Join Networks button and choose to Join an existing Network, type in your network name and Password for joining a Network. After you are done, you will see that you will get two or more IP addresses shown while you point your mouse cursor over the Radmin Server tray Icon. Now you are done with setting up a virtual Network.

6. Again on the remote computer make sure that Windows built-in firewall doesn't block Radmin connection. Open Start -> Control panel -> Windows firewall, go to Exceptions tab and add Radmin port 4899 as an exception. If you have a proprietary firewall (for example, ZoneAlarm or any other firewall software) refer to its documentation to find out how to create exception for a port.

7. On the local computer open Radmin Viewer, on the main menu click "Connection -> New connection".

Enter the IP address of the remote computer into "IP address or DNS name" field. (You have to enter a Hamachi IP address in case if you are connecting over the Internet, please see step 5.) Enter a descriptive name of the connection and click OK.

8. Now in order to connect to the remote computer in Full Control mode, right click on the newly created connection, and click Full Control in the context menu.

Edited: Mikhail Igoshin - 16.11.2009 07:27:26
I am going to connect the remote PC behind a router. I have installed Cisco Network Magic Pro for inside network. Do I have to still install HAMACHI? Is there any program conflict between two programs? Your prompt response will be appreciated.
You don't need Hamachi:

Please, read what port forwarding is here:

After that, visit this page, find you router model and follow the onpage instructions:
Thanks for your post , I go through that........

Eugene if I setup my router port forwarding manually can you tell me what IP address should be in the Radmin application, is it the external IP's of server and viewer?

Thanks Mike
Edited: morleym2002 - 19.01.2015 10:54:09
Eugene Idzikovsky wrote:
Eugene if I setup my router port forwarding manually can you tell me what IP address should be in the Radmin application, is it the external IP's of server and viewer?

Thanks Mike
In Radmin viewer you specify an external IP of the router, which is on front of Radmin server.
Thanks for your response Eugene but my tray icon just displays the local IP address ( not the external one ( Do I need to install the Hamachi software even though I have setup port forwarding on both routers?

Regards Michael
No, you don't. You can ask your ISP for the external IP address or check it at
Thanks Eugene my external IP is variable so I think I will need to use Hamachi as described in your instructions, when I do so and setup port forwarding do I use the Hamachi IP address in my router port forwarding setup or the local IP of the PC.

Thanks for your help Michael
You can use (which would be easier than Hamachi), if you use Hamachi, you won't need to do port forward.
[URL=<a href=]"[/URL]> windows 10 get help
Pages: 1
Users browsing this topic (1 guests)

Radmin 3.5

Windows 10 Compatible


Free for 30 days


Only $49 per lifetime license
for  50 PCs - $29.8 per remote PC
for 100 PCs - $24.9 per remote PC
for 150 PCs - $23.3 per remote PC
from 200 PCs - $22 per remote PC
Follow us on Twitter
Famatech Corporation Copyright © 1999-2018 Famatech. All rights reserved.