We are having LAN network in our office. The cable from internet is connected to switch, and all the systems are connected to that switch. Now i would like to know how to connect to this network from some other network. How can i monitor all the systems of this LAN from other place.
The possible solution is to configure your router/firewall to forward connections on port 4899 to computer 127.0.0.1, connections on port 4898 to computer 127.0.0.2, connections on port 4897 to computer 127.0.0.3, etc (ports and IP's are only examples). Now you can run Radmin Viewer outside the NATed LAN and connect to the router/firewall using different ports to be forwarded to different Radmin Servers inside the LAN.
Thanks for your reply,
But i was able to connect even the port numbers are different for example for server i have given port 4890 and for client i have give default 4899 even then its connecting.
And if i give port 4890 to client then its not connecting and giving error "can,t connect to server" .
Once again thanks for your reply,
I got it by restarting the radmin. One more problem i have is how to forward the conncetions on ports to computers. We are using switch.
And i think u know our office setup, the connection from service provider is connected directly to switch and all systems in lan are directly connected to switch.
Can we assign different port numbers for different ports of switch.
You need to configure port forwarding rules on your server/router or on your ISP server if you want establish connection from internet to this computers. Also you can connect them from other network but you should know their external IP addresses.
You should configure your pc with Windows 2003 server to forward incoming connection to corresponding computers that you want to conrol remotely.
Describe you server (cumputer with Win2003 server installed on it) environment please.
I was really thankful to you,
First of all i was not able to connect to that windows 2003 server only. Since the ip of the server is 192.168.1.1 and the static ip is 59.256.89.15 (all ips are examples) how should i connect to it. After that i can forward incomming connections to corresponding systems.
No, how will it connect directly to windows 2003 server even i had tried, but it dont. Since all systems clients and windows 2003 server are directly connected to different ports of switch. How does it connect only to windows 2003 server, it can connect to any system know.
For this i am asking what to do, how should i directly connect to server. If i got this my problem will be solved.
Does your modem allow data packet routing ?
If yes you can configer it force connections to Win 2003 server.
If no, i hope there is another way of how to do it, also you can ask for this your system administrator.
Solution i mentioned above works if you have ADSL modem and internet connection comes directly to your W2k3 server and then it goes through switch to your local computers. As i understand your network configuration up to now it is hard to implement Radmin on your local pcs. You need to place above the switch something which would be possible for routing data packets.
But if i connect internet directly to my windows 2003 server and then to switch, i have to share my internet connection through proxy but i think it will slow down the internet speed. Hence i was trying to configure directly through switch. Is there any other method to configure it.
Either with router or any thing.
i have to share my internet connection through proxy
You may NAT instead, or W2k3 server + ISA server which is more complicated but powerful solution. Productivity of such solution depends on hardware of your server. Also you can place router instead of server between internet and your local network. Configuring router is much simpler than server.
No i dont want to go for ISA server as it is more complicated and even our hardware doesnt support.
And now i want to know how to configure router between internet and local network, please post in detail which will help me a lot.
I am having a router of
Belkin F5D7230-4 Router
Model: F5D7230-4 - Data Transfer Rate: 54 MBps - 2.4 GHz - Wireless Connection.
I think the connection from internet should be connected to one port of router and second port of router to one system say windows 2003 server, and one more port of router to switch, and all other systems are connected to the switch.
And now i have to configure router through my system connected to router (windows 2003 server system), is this is correct. But i think it wont work since the connection from internet is connected to router and server, switch both are connected to router so i dont understand where the packets will go either to system or to switch so i think this dont work, i have to do more for that.
And one more question i want to ask is if the connection from internet is connected to switch or hub or router and one system is connected to that component, and if i give the ip of the internet will it connect to that system since there are no other systems connected.
i dont understand where the packets will go either to system or to switch
You can define this on your router.
And one more question i want to ask is if the connection from internet is connected to switch or hub or router and one system is connected to that component, and if i give the ip of the internet will it connect to that system
If your switch, hub, router supports NAT then yes, if no you can try, but i think this is meaningless.
I had configured my router to port forward 4895 to 192.168.2.5 and portnumber 4896 to 192.168.2.6 and so on.....my router ip is 192.168.2.1 my isp ip is 68.x.x.x Now what i had thought is if I give 192.168.2.1 with port number 4895 it will directly go to system of 192.168.2.5 and if I give 192.168.2.1 with portnumber 4896 it will go to 192.168.2.6 But its not happening when i give the ip 192.168.2.1 with any portnumber its giving error "can't connect to server" even if I give the ip of isp 68.x.x.x its giving same. I dont know the port forwarding is taking place or not. And also please help me in how to connect to these lan systems. The thing is if I give isp ip 68.x.x.x with portnumber 4895 it has to connect to 192.168.2.5 and if I give isp ip with portnumber 4896 it has to connect to 192.168.2.6 like this setup I needed for this pls help me where to place my router and how to do this.
With Best regards,
I had port scanned my public ip using third party tool advanced port scanner from o-6000 and its showing that only 3 ports 23,53,80 are open and remaining all are closed but i think this is not correct I am able to use my yahoo messenger, wise-ftp and etc..,,, which port numbers are different and its showing they are not opened but even then I am able to connect. I dont know whether this tool is giving me correct information or not. U can suggest me if there is any tool to port scan and also please tell me how to open any ports in local computer I had not blocked any port in my local computer and for ISP I think I have to take their permission. I will be thankful to u if u can help me more.