station is set to obtain ip from a router. checking each station, they all have thesame ip address. this must be because their behind the router. how could i possibly connect thru each station via another pc thru internet? (im already using service from no-ip.com).
please help me.
ex. ip of station is
and their real ip appear on no-ip.com is 243.233.332.459
take note, all station appears to have 243.233.332.459 as their ip address ((
There are two solutions to access remote computer behind a router/firewall/proxy. The first is configuring an intermediate host to forward all connections on port 4899 to the target computer. The second is installing an additional copy of Radmin Server on an intermediate host and using "Connect through host" option when connecting to the target computer.
Radmin uses 4899 TCP port by default. You can open such a port on the router/firewall. Another solution is to change the Radmin port number - on both the Server and the Viewer - to the value of a port that is already open on your router/firewall. If your firewall works under Windows you can install and start the Radmin Server on it. Then you can connect using 'Connect through host feature of the viewer. Sometimes only the router has a public IP address. In this case you have to configure 'Forwarding' on a router/firewall. Configure the router to forward connections from some port on the router to a specific IP address and port (the default port of Radmin server is 4899) of the computer on your internal network. You need to assign a port on the router for each computer you need to access. After that, to connect to a computer behind the router/firewall from the Internet you need to specify the IP address of the router and the port on the router that corresponds to your computer in the internal network. The router will then forward connections to computers in the internal network.
"Connect through host" option (available when creating new connection in Radmin Viewer) lets you to connect through an intermediate host when there is no direct TCP/IP connection with the computer you want to administer, but an intermediate computer (or host) does have a direct TCP/IP connection to both your target computer and to your local computer. Radmin server must be running on such an intermediate (host) computer for this to work. Example: You have a local network without a direct connection to the Internet. However, there is one computer on that network that does have a direct connection to the Internet. If you install Radmin server on that computer to make it an intermediate host, you can connect to other computers in the local network from the Internet through that intermediate host.
The IP address you posted looks weird. IP address must consist of 4 numbers, separated by dots, each being smaller than 256.
Visit http://www.whatismyip.com. It will show your real external IP.
Your IP Addresses are not possible. Try running ipconfig /all from the command line on each PC. It will give you the LOCAL ip address. Your public IP address can be seen on your router.
Or use whatismyip.com