There's no Radmin version for Mac OS. We are planning to develop Mac version of Remote Administrator, but now we are extremely busy with beta-testing of Radmin 3.0. The development of Mac version was not started yet. However, you can try running Radmin Viewer under Virtual PC or other Windows emulator for Mac. Radmin has 30-day trial period, so you won't need to buy it to test is you would be able to run Radmin under Windows emulator for Mac.
1. Make sure TCP/IP protocol is properly installed on both computers (you can check that by PING command. Run IPCONFIG.EXE to find out current TCP/IP configuration and IP's of both computers).
2. Run Radmin Server on the computer you want to control remotely. This computer will be called "remote computer" or "server", and computer you are connecting from is called "local computer" or "client".
3. People from the remote side must tell you the IP address of the remote computer.
4. Make sure, that both computers are connected to network and you can ping remote computer from local computer (use PING command for that).
5. Run Radmin Viewer on the local computer, click "Connect/Connect to" menu, enter the IP address of the remote computer. If all is configured correctly, you will see remote computer's desktop and be able to operate it by mouse and keyboard! See Radmin documentation for details.
If you can't connect, there are things you must check:
- Make sure that port 4899 is opened on remote computer (you can use any
freeware port scanner for this, for example - Advanced Port Scanner
that can be downloaded for free from www.radmin.com)
- If one remote computer uses modem connection, it will be better to get
permanent IP address for it, or you will need to get it's IP each
time it is connected to your ISP.
- If your remote computer is connected to network via proxy or firewall,
make sure that firewall's configured to allow all connections on port 4899.
- If your remote computer is in LAN, has no real IP, and your local
computer is not in the same LAN: please configure your LAN server with
real IP to forward all connections on port 4899 to remote computer,
and use your LAN's server IP instead of remote computer's IP in
"connect to" dialog.
It´s a simple option but it would be nice, check boxes for install specified modules, so you can install/add the more interested you are.
This is already possible with Radmin 2.2 - you can install Viewer only, Server only or both.
If you mean Full Control, File Transfer, Telnet, etc. modules, they are not actually modules, sicne they are built-in into r_server.exe and there's no way to not install them.
You can disable certain modes by using the following Registry keys:
Blocks Redirect connections to this Radmin Server. The key type is binary with possible values of "01 00 00 00" (disallow) and "00 00 00 00" (allow).
Blocks Full control connections to this Radmin Server. The key type is binary with possible values of "01 00 00 00" (disallow) and "00 00 00 00" (allow).
Blocks View Only connections to this Radmin Server. The key type is binary with possible values of "01 00 00 00" (disallow) and "00 00 00 00" (allow).
Blocks Telnet connections to this Radmin Server. The key type is binary with possible values of "01 00 00 00" (disallow) and "00 00 00 00" (allow).
Blocks File Transfer connections to this Radmin Server. The key type is binary with possible values of "01 00 00 00" (disallow) and "00 00 00 00" (allow).
I was talking about FTP in v. 2.2, it don´t seem to resume uploads
This feature is already implemented in Radmin 2.2. If connection was lost during file transfer session, the beginning of the file will be written anyway. Re-connect, try to transfer the same file to the same location once again and select "Overwrite". Only the ending of the file will be transferred.
There is a Hardware Acceleration option in Windows located at "Start->Control Panel->Display Properties->Settings->Advanced->Troubleshooting->Hardware Acceleration", which has the default set at FULL. Try setting it to NONE on the remote (server) computer. This may solve the problem.
Radmin cannot work on a PDA. We are planning to port Remote Administrator to PDA's (Pocket PC/Windows Mobile) in the future, but now we are extremely busy with beta-testing of Radmin 3.0. The development of PDA version was not started yet.