Radmin 3 - General Installation Guide

Radmin состоит из двух модулей: Radmin Server 3 и Radmin Viewer 3

Before installation

Radmin 3 consists of two modules:

	Radmin Server 3		Radmin Viewer 3
	The Server module needs to be installed on the remote computer (for example your office PC) that you want to access from your own one (for example your home PC or notebook).		The Client module (also called the Viewer) needs to be installed on the local computer (for example your home PC or notebook) which you want to use to access your remote PC.

Both computers need to be connected by TCP/IP on a local network, modem-to-modem, or over the Internet.

Installing Radmin Server 3

Step 1:	Download Radmin Server 3.4. Transfer the file: rserv34.exe onto the remote computer (the remote computer is the computer which you want to gain access to later via Radmin) and run (execute) rserv34.exe on the remote computer. Follow the on-screen instructions. All the necessary files will be copied to the system default directory (C:\WINDOWS\system32\rserver30\). Any previous versions of Radmin Server 3 installed on your computer will be automatically replaced with the new version (without affecting your settings).

Step 2:	Configure Radmin Server on the remote computer. To do this:
	(a) Right Click on the Radmin Server tray icon and choose "Settings For Radmin Server". (b) Select the "Permissions" button. (c) Select the security mode. Radmin security mode is more useful when connecting through the Internet and has a more flexible configuration of access rights. Windows NT security mode is mainly used on internal corporate networks. (d) You must add a user to the security system. At least one user is required to access Radmin Server. (e) Add a new user. Use Latin characters to enter the user name and password. The minimum password length is 6 characters. (f) Now you can configure the access rights for the user. You need to check at least one option to allow access to Radmin Server. (g) To provide an additional security level you can change Radmin Server's general settings. If you use Radmin only for technical support (when a technical specialist connects to your computer and resolves your computer problems remotely), you can customize the confirmation of incoming connections (connections can be allowed or disallowed manually or by timer). You can also change the default port, which is used when your technician or administrator connects to Radmin Server. If you change the default port, write it down or tell the administrator. That port number will be needed to configure Radmin Viewer.
Step 3:	Move the mouse cursor over the icon of Radmin Server to see the IP address of your computer. Write the numbers down; you'll need them later.
	Also you can see your public IP address here. If you don't have public IP address, contact your network administrator to configure the router.
Step 4:	Now you can connect to the Radmin Server by using our free software: Radmin Viewer. Follow the instructions for its installation and configuration below.

When the 30-day trial period has expired, Radmin Server requires a license in order to continue operating. When you purchase a program license, Famatech will deliver a license code that will unlock Radmin Server for continued use. Please see Products ordering page for further details.

Installing Radmin Viewer 3

Step 1:	Download Radmin Server 3.4. Execute rview34.exe on the remote computer (the local computer is the computer from which you connect to the remote computer). Follow the on-screen instructions. All the necessary files will be copied to the system default directory (C:\Program Files\Radmin Viewer 3\). Any previous versions of Radmin Viewer 3 that may be installed on your computer will be automatically replaced with the new version (without changing your settings).
Step 2:	Run Radmin Viewer and create a new connection.
	Enter the IP address of the computer on which you installed Radmin Server (see Step 3 above). Enter a name for the connection (that will make sense to you some months from now). You can change any of the default connection settings to save network traffic or to increase connection speeds if using a slow internet connection.
Step 3:	Check the availability of the remote computer by scanning with the built-in scanner. After the scan (if the icon for the connection is checkmarked) Radmin Server on the remote computer is installed and ready for a connection.
	Enter your user name and password, which were defined above in Step 2 (e) in your Radmin Server on the remote computer. Now you can enjoy a fast and secure remote control of your distant computer!